Installing WinFlow

From Observer GigaFlow Support | VIAVI Solutions Inc.
Revision as of 11:48, 23 November 2018 by Niall (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Download http://builds.anuview.net/anuviewWinflow.zip and extract to C drive. This will create c:\winflow folder

If necessary, install dotnet runtime and vc_redist (all in the winflow\files folder)

Copy the c:\winflow\files\appsettings.NetworkInformationSettings.json.org file to c:\winflow\netcoreapp2.0\appsettings.NetworkInformationSettings.json

Edit the c:\winflow\netcoreapp2.0\appsettings.NetworkInformationSettings.json file Change the following section to the ip address of the server (172.21.40.133 in this case)

"iPAddressList": {
   "machineIPs": [
     {
       "IPAddress": "172.21.40.133",
       "ProtocolType": "IP"
     }
   ],


Change the following section to where you want the flows to go to

"flowDestinations": [ "172.21.40.133/2055", "172.21.40.199/6666" ]


Once done, save. Run an admin command prompt and run “c:\winflow\runwinflow.bat” When running you should be able to browse to the app on http://127.0.0.1:1890 use the local server admin account to log in


To run as a service, run the following in an administrator command prompt

c:\winflow\files\nssm.exe install anuviewWinflow c:\winflow\runwinflow.bat

To run start service, run the following in an administrator command prompt

c:\winflow\files\nssm.exe start anuviewWinflow

The service will auto start after any reboot.